video

25GBASE SFP28 SR

25G SFP28 SR トランシーバー モジュール アレ デザイン フォー ユース イン 25 ギガビット イーサネット リンク オン アップ から 100m of マルチ モード ファイバー。

● ビルトイン マコム チップ, 最大 電力 消費 1W
● テスト済み in ターゲット スイッチ for 優れた パフォーマンス, 品質, and 信頼性
● 高速 接続 準拠 to IEEE 802.3by and IEEE 802.3cc
● Commercial case temperature range of 0 degree to 70 degree
● 最大 リンク 長さ of 100m オン マルチ モード ファイバ (MMF)
● サポート 4x25G ファン 出力 および 簡単 移行 to 100G プラットフォーム
● ホット プラガブル SFP28 MSA 準拠
● デジタル 光 監視 機能 為 強力 診断 機能
● Class 1 FDA Laser Safety and RoHS Compliant

  • 製品説明

25Gb/s 850nm SFP28 トランシーバ モジュール

25G SFP28 SR transceiver modules are designed for use in 25 Gigabit Ethernet links on up to 100m of Multi mode fiber. reaching a link up to 100m over OM4 MMF (70m over OM3). The SFP28 transceiver module supports running on the same 1G/10G network cabling Infrastructure, giving 2.5 times increase in speed at least, and the built-in DDM/DOM functions monitor the real-time operating status. Each SFP28 transceiver module is individually tested on a series of Cisco switches, and is fully compliant with the SFP28 MSA, RoHS, CPRI, and the eCPRI standards. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, telecom, and data center.


Advantages of 25GBASE-T

 

1

25GBASE-T can cost-effectively expand bandwidth capacity and has become the most in-demand target for large data centers and next-generation center services. 25GBASE-T uses a single-channel manufacturing process to achieve 25Gbps transmission, which improves network bandwidth performance by 2.5 times compared to the transmission performance of 10GBASE-T. 25GBASE-T can provide 4 times the switch port density per switch chip, which means it has higher port density and better scalability than 40GBASE-T.

2

25GBASE-T is both backward compatible with 10GBASE-T and can also provide forward compatibility (such as 100G Ethernet) through automatic negotiation, which greatly improves connection efficiency and effectively saves costs.

3

25GBASE-T can support more topological architecture cableling, such as connections between cabinets or EoR switchs to servers, and MOR cableling. 25GBASE-T also provides an effective solution for managementing large batches of switches in large cloud data centers


As the picture shows, 25GBASE-T is apt for data centres with various network architectures, such as fat tree architecture (FatTree architecture), spine-leaf architecture, and traditional three-tier architecture.


 

25G SFP28 SR

FB-リンク

フォーム ファクター

SFP28

最大 データ レート

25.78Gbps

波長

8500ナノメートル

最大 ケーブル 距離

100m@OM4/70m@OM3

コネクタ

デュプレックス LC

ティッカー

送信機 タイプ

VCSEL

受信機 タイプ

ピン

TX 電源

-8.4~2.4dBm

受信機 感度

<-10.3dBm

パワーバジェット

1.9デシベル

レシーバ 過負荷

2.4デシベル

電力 消費

未満 より または 等しい から 1W

絶滅 比率

>2dB

DDM/DOM

サポート

コマーシャル 温度 レンジ

0 to 70 degree (32 to 158 degree F)

CDR (クロック および データ リカバリ)

TX & RX Built-in CDR

FEC 機能

サポート RS-FEC, FC FEC

プロトコル

SFF-8472, SFF-8024, SFF-8431, SFF-8432

保証

3 年


FAQ

 

Q:What is the max 伝送 距離 of the 25G SFP28 光 モジュール?

A: At present, the 伝送 距離 of the SFP-25G-ER 光 モジュール is the largest, 理論的に 40 キロメートル. It is not ruled out that there will be 25G 光 モジュール with long transmission distance in the future。

Q: Can 25G SFP28 オプティカル モジュール of 異なる ブランド be 相互運用可能?

A: 25G 光 モジュール 缶 相互運用 as long as they 準拠 with 業界 標準。

Q: Can the SFP28 SFP28 オプティカル モジュール be inserted into the SFP plus port?

A: If there are no special requirements for the software settings of port identification, it is 理論的に possible. The working rate at this time is 10Gb/s instead of 25Gb/s.

Q: Can SFP28 ports be 相互接続 with QSFP28 ports?

A: The answer is yes. Configure the 100G QSFP28 port on the device to 4*25G mode (if supported), then insert the 100G module into the port, and connect the SFP28 光 モジュール in the SFP28 port through a one-to-four cable。

人気ラベル: 25gbase sfp28 sr, 中国, サプライヤー, 製造業者, 工場, カスタマイズ, 卸売, 見積もり, for sale, in stock, free sample, buy discount

上一条: 25G SR
次条: 25GBASE SFP28 LR
お問い合わせを送る

(0/10)

clearall